From: Devender Singh (devender.singh@xxxxxxxxxxxxxx)
Date: Tue May 22 2001 - 22:45:24 GMT-3
Mohammad,
I will disagree with you. I think burst size is per interval. say 16000/8 =
2000
best regards
Devender Singh
BE(Hons), CCNP
IP Solution Specialist
-----Original Message-----
From: Mohamed Heeba [mailto:MAHeeba@itqan.co.ae]
Sent: Saturday, 19 May 2001 2:21
To: 'ccielab@groupstudy.com'
Subject: Traffic shapping question
guys ;
i have a question about the traffic-shape rate /traffic-shape group command
used on the serial interfaces
the command syntax is
traffic-shape group list access-rate . burst-rate excess-burst
does anyone know if the burst rate is the max bit rate which can the link
get or it is the increment value over the bit rate
for example :
if the requirement is to have min bw 16000k for certain traffic and 32000 as
the max
so the command should be
traffic-shape rate 16000 32000 32000
OR
it should be
traffic-shape rate 16000 16000 16000
??
thx
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:49 GMT-3