From: Roman Rodichev (rodic000@xxxxxxxxxxx)
Date: Sat May 19 2001 - 23:55:56 GMT-3
John, this happens all the time. AUX interfaces on the 2509 are being flaky.
You have to clear the line and get in right away, if fails, try getting in
5-6 times, then clear the line again if that didn't work. You have to keep
trying.
So in your case r2 is line 2.
do this:
clear line 2
and right away
r2
and keep trying, until you get in. Use the UP arrow key and the ENTER key.
Good luck!
>From: "Jeongwoo Park" <jpark@wams.com>
>Reply-To: "Jeongwoo Park" <jpark@wams.com>
>To: "Ccielab@Groupstudy. Com" <ccielab@groupstudy.com>
>Subject: Terminal Server 2509 for the first time !!
>Date: Sat, 19 May 2001 17:29:06 -0700
>
>Hi all
>How can I get my 2509 terminal server to work?
>Here is my config
>
>TermServer#sh r
>05:47:29: %SYS-5-CONFIG_I: Configured from console by consoleun
>Building configuration...
>
>Current configuration:
>!
>version 12.0
>service timestamps debug uptime
>service timestamps log uptime
>no service password-encryption
>!
>hostname TermServer
>!
>enable password wams
>!
>ip subnet-zero
>no ip domain-lookup
>ip host r1 2001 1.1.1.1
>ip host r2 2002 1.1.1.1
>ip host r3 2003 1.1.1.1
>!
>!
>!
>interface Loopback0
> ip address 1.1.1.1 255.255.255.255
> no ip directed-broadcast
>!
>interface Ethernet0
> no ip address
> no ip directed-broadcast
> shutdown
>!
>interface Serial0
> ip address 2.2.50.2 255.255.255.252
> no ip directed-broadcast
> no ip mroute-cache
> no fair-queue
> clockrate 64000
> shutdown
>
>!
>interface Serial1
> ip address 3.3.50.1 255.255.255.252
> no ip directed-broadcast
> clockrate 1300000
> shutdown
>!
>ip classless
>!
>!
>line con 0
>line 1 8
> no exec
> transport input all
>line aux 0
>line vty 0 4
> login
>!
>end
>
>I have three other router that are r1, r2, and r3 respectively.
>How can I get to r1, r2, or r3?
>Isn't it this one? for example,
>TermServer#r1
>TermServer#r2
>TermServer#r3
>It did not work
>I get "connection refused by remost host" error
>and sometimes I get "Trying r2 (1.1.1.1, 2002)... Open" and get stuck.
>I am using termserver for the first time.
>Can someone guide me through how to use it?
>
>In addition, here is output of "sh line"
>
>TermServer#sh line
> Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
>Int
>* 0 CTY - - - - - 6 1 0/0
>-
>* 1 TTY 9600/9600 - - - - - 3 2 0/0
>-
>* 2 TTY 9600/9600 - - - - - 2 0 0/0
>-
> 3 TTY 9600/9600 - - - - - 1 0 0/0
>-
> 4 TTY 9600/9600 - - - - - 0 0 0/0
>-
> 5 TTY 9600/9600 - - - - - 0 104 0/0
>-
> 6 TTY 9600/9600 - - - - - 0 0 0/0
>-
> 7 TTY 9600/9600 - - - - - 1 0 81/243
>-
> 8 TTY 9600/9600 - - - - - 0 6 208/622
>-
> 9 AUX 9600/9600 - - - - - 0 0 0/0
>-
> 10 VTY - - - - - 1 0 0/0
>-
> 11 VTY - - - - - 0 0 0/0
>-
> 12 VTY - - - - - 0 0 0/0
>-
> 13 VTY - - - - - 0 0 0/0
>-
> 14 VTY - - - - - 0 0 0/0
>-
>Thanks
>
>jp
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to abuse@groupstudy.com
>**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:45 GMT-3