From: John Kaberna (jkaberna@xxxxxxxxxxxx)
Date: Sat May 19 2001 - 17:40:16 GMT-3
I forgot to mention that you will have to put a frame map on spoke2 to
spoke1 as well for the first step. That is if your going with the multiple
frame map option which you weren't supposed to do in lab 1.
John Kaberna
CCIE #7146
NETCG Inc
www.netcginc.com
(415) 750-3800
Fax: 750-3900
----- Original Message -----
From: "John Kaberna" <jkaberna@netcginc.com>
To: "Roman Rodichev" <rodic000@hotmail.com>; <kenyeo@email.com>;
<ccielab@groupstudy.com>
Sent: Saturday, May 19, 2001 1:34 PM
Subject: Re: Redistributing OSPF into IGRP - Policy routing
> Not quite Roman. The policy routing was used because you couldn't use
> multiple frame maps. If you look at the hub it has a frame map to each
> spoke. Well each spoke only has a frame map to the hub. So, in order for
> the spokes to communicate you can do one of two things. 1. Put in a
frame
> map on spoke1 pointing to spoke2. 2. Use policy routing to send all
> traffic destined to the other spoke to the hub. Review the configs and
you
> will see what I'm talking about.
>
> As far as ip ospf network, all that command is used for is to easily set
the
> timers for hellos, dead-interval, etc. If you cannot use that command you
> need to know how to change the timers. Hope this makes sense even though
I
> didn't explain it very clearly.
>
> John Kaberna
> CCIE #7146
> NETCG Inc
> www.netcginc.com
> (415) 750-3800
> Fax: 750-3900
>
>
> ----- Original Message -----
> From: "Roman Rodichev" <rodic000@hotmail.com>
> To: <kenyeo@email.com>; <ccielab@groupstudy.com>
> Sent: Saturday, May 19, 2001 1:13 PM
> Subject: Re: Redistributing OSPF into IGRP - Policy routing
>
>
> > Ken, policy routing should be used when you can't achieve certain task
> with
> > the routing protocol you have or WAN technology you are using. And of
> > course, when you are asked to use it. Let's say you have multipoint
> > frame-relay, and you can't use "ip ospf network" statement. The only way
> to
> > achieve routing between FR spokes is to use policy-routing.
> >
> > by the way, this is from Lab1 of ccbootcamp, so I'm not violating NDA.
NDA
> > is f...ing scary nowadays
> >
> >
> > >From: "Ken Yeo" <kenyeo@email.com>
> > >Reply-To: "Ken Yeo" <kenyeo@email.com>
> > >To: <ccielab@groupstudy.com>
> > >Subject: Redistributing OSPF into IGRP - Policy routing
> > >Date: Sat, 19 May 2001 12:59:50 -0500
> > >
> > >Is policy routing allowed for the lab?
> > >
> > >The reason I ask is because policy routing essentially bypass routing
> table
> > >and it behave like static route, only it depends on source address
> instead
> > >of destination address.
> > >
> > >Policy routing can solve a lot of problem, especially redistributing
VLSM
> > >OSPF routes into IGRP with same major network.
> > >
> > >What is your thought?
> > >
> > >Thanks!
> > >
> > >Ken Yeo
> > >**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:45 GMT-3