Re: FrameRelay subinterface question

From: sanjay (ccienxtyear@xxxxxxxxxxx)
Date: Fri May 18 2001 - 20:41:21 GMT-3


   
Thanks guys. Thats exactly how I was going to do it, but just wanted to see
how you guys would interpret that question. Infect I will run IGRP on the
point to point and OSPF on the multipoint interfaces.

thanks,
Sanjay

----- Original Message -----
From: "Jason and Karen Bomar" <jbomar1291@earthlink.net>
To: <ccielab@groupstudy.com>
Sent: Friday, May 18, 2001 4:14 PM
Subject: RE: FrameRelay subinterface question

> Greetings -
>
> Simply as you've stated it, you could go either way - but assuming that
you want
> to run a routing protocol over it (especially OSPF), interface selection
is
> important as it determines configuration.
>
> I usually go with point-to-multipoint everwhere (from the sub-int
perspective)
> and either NBMA (default) or point-to-multipoint for the IP OSPF NETWORK
TYPE
> parameter. I would suggest knowing how to do it under all combinations
however -
> pt-2pt, multipoint, physical, and OSPF types as well NBMA, pt-2-pt,
multipoint,
> broadcast.
>
> Hope this helps.
>
> Regards,
> Jason
>
> ------Original Message------
> From: "sanjay" <ccienxtyear@hotmail.com>
> To: ccielab@groupstudy.com
> Sent: May 18, 2001 10:45:40 PM GMT
> Subject: FrameRelay subinterface question
>
>
> Here's the scenerio...
>
> I have 4 routers accross a Frame Cloud. R2, R3, R4 and R5. I need to
configure
> R3 using two sub-interfaces. One sub interface for the connection to R5
and
> the other sub interface for the connection to R2 and R4. Configuring
> sub-interfaces on R2, R4 or R5 is not allowed. My question is, do I need
to
> configure point-to-point for the subinterface that is going to R5 and
> multipoint for the other subinterface which connects to R2 and R4. ? or
both
> needs to be point to point. ?
>
> thanks,
> Sanjay
> **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:45 GMT-3