From: Erick B. (erickbe@xxxxxxxxx)
Date: Sat May 19 2001 - 00:10:47 GMT-3
Don't forget that the physical interface counts as a
interface as well as the subs, so a total of 3
possible interfaces. So you can do point-to-point to
each location as well.
--- sanjay <ccienxtyear@hotmail.com> wrote:
> Here's the scenerio...
>
> I have 4 routers accross a Frame Cloud. R2, R3, R4
> and R5. I need to configure
> R3 using two sub-interfaces. One sub interface for
> the connection to R5 and
> the other sub interface for the connection to R2 and
> R4. Configuring
> sub-interfaces on R2, R4 or R5 is not allowed. My
> question is, do I need to
> configure point-to-point for the subinterface that
> is going to R5 and
> multipoint for the other subinterface which connects
> to R2 and R4. ? or both
> needs to be point to point. ?
>
> thanks,
> Sanjay
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:45 GMT-3