From: Kris Foster (kris@xxxxxxxxx)
Date: Fri May 18 2001 - 20:11:03 GMT-3
Your best bet would be to configure a point-to-point to R5 and a
multipoint to R2 and R4. If you're running OSPF make sure you network
types match up and all that good stuff.
Kris,
On Fri, 18 May 2001, sanjay wrote:
> Here's the scenerio...
>
> I have 4 routers accross a Frame Cloud. R2, R3, R4 and R5. I need to configur
e
> R3 using two sub-interfaces. One sub interface for the connection to R5 and
> the other sub interface for the connection to R2 and R4. Configuring
> sub-interfaces on R2, R4 or R5 is not allowed. My question is, do I need to
> configure point-to-point for the subinterface that is going to R5 and
> multipoint for the other subinterface which connects to R2 and R4. ? or both
> needs to be point to point. ?
>
> thanks,
> Sanjay
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:45 GMT-3