Re: T1 Controller error

From: Kenneth Sacca (ksacca@xxxxxxxxx)
Date: Fri May 18 2001 - 19:03:33 GMT-3

• Next message: Jason Gardiner: "Re: point to point T1 troubleshooting."
• Previous message: Matt.Wilkerson@xxxxxxxxxx: "networkstudyguides.com ?"
• Maybe in reply to: sanjay: "T1 Controller error"
• Next in thread: sanjay: "Re: T1 Controller error"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Usually means that the controller is older, and the
firmware must be upgraded on it. You can't do it
yourself, it has to be sent in to Cisco.

Regards Ken

sanjay wrote:
>
> Has anyone encountered this error message below. This is a T1 controller in a
> 3640, running IOS 12.0.
>
> 00:04:47: %CONTROLLER-2-FIRMWARE: Controller T1 0/0, firmware is not running
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html

• Next message: Jason Gardiner: "Re: point to point T1 troubleshooting."
• Previous message: Matt.Wilkerson@xxxxxxxxxx: "networkstudyguides.com ?"
• Maybe in reply to: sanjay: "T1 Controller error"
• Next in thread: sanjay: "Re: T1 Controller error"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:45 GMT-3