From: sanjay (ccienxtyear@xxxxxxxxxxx)
Date: Fri May 18 2001 - 19:22:13 GMT-3
Thanks for the info... I moved the T1 controller in slot 3 from slot 0, and
the error message has gone away. If it is indeed firmware issue, why is it
working fine in slot 3 ??
----- Original Message -----
From: "Kenneth Sacca" <ksacca@cisco.com>
To: "sanjay" <ccienxtyear@hotmail.com>
Cc: <ccielab@groupstudy.com>
Sent: Friday, May 18, 2001 3:03 PM
Subject: Re: T1 Controller error
> Usually means that the controller is older, and the
> firmware must be upgraded on it. You can't do it
> yourself, it has to be sent in to Cisco.
>
> Regards Ken
>
>
> sanjay wrote:
> >
> > Has anyone encountered this error message below. This is a T1 controller
in a
> > 3640, running IOS 12.0.
> >
> > 00:04:47: %CONTROLLER-2-FIRMWARE: Controller T1 0/0, firmware is not
running
> > **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:45 GMT-3