From: Himawan Nugroho (nhimawan@xxxxxxxxxx)
Date: Fri May 18 2001 - 01:22:15 GMT-3
Chris,
AFAIK, cisco router use LMI autosense to identify the LMI type in FR
switch.
And if we only type: encapsulation frame-relay, the default type is cisco
and if we want to use IETF we have to type: encap frame ietf
Are you sure we don't have to add cisco or ietf when using sub-interface?
hmm..I have to try in my lab..
Regards,
Himawan Nugroho
Network Solutions Specialist
IBM Global Services - Indonesia
Voice : 62-21-5238897, Fax : 62-21-2512933
chris@pacinter.net (Martin, Chris)@groupstudy.com on 05/17/2000 10:34:30 AM
Please respond to chris@pacinter.net (Martin, Chris)
Sent by: nobody@groupstudy.com
To: "Sam Pilot" <sam_pilot@hotmail.com>, <ccielab@groupstudy.com>
cc:
Subject: Re: Frame Relay questions
Sam my comments are down below with a *** next to it
----- Original Message -----
From: "Sam Pilot" <sam_pilot@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, May 17, 2001 8:15 PM
Subject: Frame Relay questions
> Can someone explain the following questions to me
>
> 1) In serial interface config mode
> encapsulation frame-relay cisco | ietf
>
> Is "ietf" used to connect to a non-cisco router
*** YES thats what its for
>
> 2) frame-relay map ip X.X.X.X DLCINo broadcast cisco | ietf
>
> When would I use "ietf" or "cisco" in the map statement?
> Is it related to the frame relay encapsulation type?
*** yes it is related to the frame-relay type. However you wouldnt need to
add the ciso or ietf statement if you configured subinterfaces. This
command
is really dependant if you are in a partial or full mesh cloud.
Also if you specify frame-relay encap cisco or ietf you do not need to add
those statements to your DLCI map statement above.
HTH
Chris Martin
CCNP CCDP MCSE
>
>
> Thanks
>
> Sam
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:44 GMT-3