From: Gupta Sudhanshu SG (Sudhanshu.Gupta@xxxxxxxxxx)
Date: Thu May 17 2001 - 14:58:40 GMT-3
Hi team,
we have a router that has quite a historical IOS. It runs on 9.14. (Please
don't laugh at that). We are trying to upgrade it to 12.0.9. It needs 16Mb
flash and 6MB RAM. We have upgraded flash to 16Mb and RAM is also adequate.
Sh ver gives
3000 Software (IGS-BFPX), Version 9.14(9), RELEASE SOFTWARE (fc1)
Patchlevel = 9.1(12.6)
Copyright (c) 1986-1994 by cisco Systems, Inc.
Compiled Wed 28-Sep-94 13:39 by chansen
System Bootstrap, Version 4.14(9.1), SOFTWARE
AVMIL01 uptime is 28 weeks, 18 hours, 29 minutes
System restarted by power-on
System image file is "igs-bfpx.914-9", booted via flash
cisco 2500 (68030) processor (revision A) with 16380K/2048K bytes of memory.
Processor board serial number 01257716
DDN X.25 software, Version 2.0, NET2 and BFE compliant.
Bridging software.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash partition 1 (Read ONLY)
8192K bytes of processor board System flash partition 2 (Read/Write)
Configuration register is 0x2102
Once I upload the new image it does not let me do anything. It hangs in
between and when I reload the older imgae it comes up again fine.
Any clues on this.
Thanks
-sudhanshu
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:44 GMT-3