From: Pickell, Aaryn (Aaryn.Pickell@xxxxxxxxxxxxx)
Date: Tue May 15 2001 - 20:56:56 GMT-3
Anyone who's actually taken the lab, please confirm this (within the realm
of NDA), but I believe that you do have access to calc.exe during the lab.
Let the computer do the math for you. That's what they were invented to do.
Your other option is to change the bandwidth on the interface. You don't
have to do inversing then. Since the cost is 10^8/bw, changing the bw will
have the same effect as changing the 10^8.
Aaryn Pickell - CCNP ATM, CCDP, MCSE
Senior Engineer - Routing Protocols
Getronics Inc.
Direct: 713-394-1609
Email:aaryn.pickell@getronics.com
This e-mail message and any attachments are confidential and may be
privileged. If you are not the intended recipient, please notify me
immediately by replying to this message and please destroy all copies of
this message and attachments. Thank you.
> -----Original Message-----
> From: Dean, Justin [mailto:Justin.Dean@nrtinc.com]
> Sent: Tuesday, May 15, 2001 6:23 PM
> To: 'ccielab@groupstudy.com'
> Subject: OSPF Cost calculation
>
>
> Does anyone know of an easy way to figure out ospf cost. I
> know that it is
> 100000000/bandwidth =cost but what if the requirement is to
> make a link
> appear as a cost of # but dont use the ip ospf cost command.
> 100000000 / x =
> cost. I need to find out x to make a bandwidth statement on
> the interface.
> My math skills are rusty to say the least, so if anyone knows
> how to come up
> with this figure quickly please help. thanks,
> justin
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:42 GMT-3