Fw: NSSA and Virtual Link Again (another problem)

From: Zeng Puyang (zbridge98@xxxxxxxxx)
Date: Tue May 15 2001 - 06:38:45 GMT-3

• Next message: tommyhu: "If Cisco 2924XL can connect with 3COM LinkSwitch 3000 ?"
• Previous message: perez claude-vincent: "Re: NSSA and Virtual Link Again (another problem)"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi, group

Sorry about my bad English, and I am a little tired for the lab exercise. The m
assage should be:

 I try this, it works fine. The lsa7 translate to lsa5 on R8.

 But when I want to config the R7 to let the lsa7 can't be tranlate to lsa5 on
R8, then it won't be seen out of nssa. The only command I remenber is 'summ x.
y.z.0 255.255.255.0 no-adv', but it let the lsa7 disappeared on R7.

 What should I do to set 'No Type7/5 translation', when R7 is not a ABR?

 Thanks

 Zeng

|:"f
|g-J+~7&!"\"fv7,1+a6Zy
_rj(}J&
**Please read:http://www.groupstudy.com/list/posting.html

• Next message: tommyhu: "If Cisco 2924XL can connect with 3COM LinkSwitch 3000 ?"
• Previous message: perez claude-vincent: "Re: NSSA and Virtual Link Again (another problem)"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:41 GMT-3