From: Mask Of Zorro (ciscokid00@xxxxxxxxxxx)
Date: Thu May 10 2001 - 16:06:24 GMT-3
Need that loopback be accessbile through the OSPF process? After all, this
is a redistribution lab... If the VLAN1 fails, then OSPF area 3 is on it's
own (no backbone area), but that is OK... It becomes like it's own
"autonomous system", not exchanging LSA's with or receiving them from
anybody. Everybody should be able to reach that loopback through the RIP
domain over the TR link with R3, right?
Hope this helps...
Z
>From: "Mannan Venkatesan" <venkat_m@ins.com>
>Reply-To: "Mannan Venkatesan" <venkat_m@ins.com>
>To: <ccielab@groupstudy.com>
>Subject: Fatkid - 501
>Date: Thu, 10 May 2001 14:40:07 -0400
>
>Hi,
>I was looking at this lab and have a question. It says 'Make sure that all
>interfaces are still accessible in the event that VLAN1 fails'. Since
>virtual
>link is configured through Vlan1 (area 2) for area 3, how area 3 is
>accessible
>in the event that VLAN1 fails? Or is there any other way to do it?
>
>Thanks,
>Mannan
>**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:38 GMT-3