From: Johnny Dedon (johnny.dedon@xxxxxxxxxx)
Date: Thu May 10 2001 - 15:51:47 GMT-3
Mannan,
Just looking at the topology and the requirements, I would say that if you
loose Area2(vlan1) then the routes redistributed into rip by ospf will now
be used. Rip has higher admin so they won't be used unless there is no ospf
route.
Johnny Dedon
Senior Staff Consultant
Exodus Professional Services
johnny.dedon@exodus.net
www.exodus.net
----- Original Message -----
From: "Mannan Venkatesan" <venkat_m@ins.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, May 10, 2001 1:40 PM
Subject: Fatkid - 501
> Hi,
> I was looking at this lab and have a question. It says 'Make sure that all
> interfaces are still accessible in the event that VLAN1 fails'. Since
virtual
> link is configured through Vlan1 (area 2) for area 3, how area 3 is
accessible
> in the event that VLAN1 fails? Or is there any other way to do it?
>
> Thanks,
> Mannan
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:38 GMT-3