From: Lange Gerhard (glange@xxxxxxxxx)
Date: Tue May 08 2001 - 16:57:36 GMT-3
Hello,
I tried to make some test with the Cisco feature "Autoinstall".
My configuration is this:
hostname r1
!
service udp-small-servers
!
interface Ethernet0
ip address 172.16.1.1 255.255.255.0
!
interface Serial1
ip address 192.168.2.1 255.255.255.0
ip helper-address 192.168.2.1
!
tftp-server flash:network-confg
File "network-confg":
=====================
ip host r19 192.168.2.2
ip host r17 192.168.1.17
Only the SLARP is functioning between r1 and r19 (192.168.2.2/24).
But r19 don't receives the minimum configuration, that containes the
files "network-confg".
In the new router there is nothing, only the IP-Address on Serial0.
Something is missing here, but I can't see it.
Ciao,
Gerhard
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:36 GMT-3