From: eteisbe@xxxxxxxxxx
Date: Tue May 08 2001 - 14:20:05 GMT-3
Make sure you don't have "NO EXEC" under line con 0.
That will give you problems.
-Evan.
-----Original Message-----
From: Andrew [mailto:arousch@home.com]
Sent: Tuesday, May 08, 2001 10:53 AM
To: Kurt Bergsbaken; 'ccielab@groupstudy.com'
Subject: Re: Dead Console Port
'transport input none' will not disable access to your console port.
At 11:52 AM 5/8/01 -0400, Kurt Bergsbaken wrote:
>When cutting and pasting several configs, I inadvertantly put the command
>transport input none on line con 0 of a 2502 I have. I obviously was no
>longer able to access the console port. Fortunately I could still Telnet
>to it. I then removed the transport input none command,
>But I still cannot access the console port. Several reboots - etc. If I
>do a write erase, it may
>fix it, but may not, and definitely won't be able to telnet. If I get it
>in rommon mode, I don't see
>that I will gain anything. I believe it is running 11.2 (18). Any
>ideas?
>**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:36 GMT-3