From: sanjay (ccienxtyear@xxxxxxxxxxx)
Date: Tue May 08 2001 - 13:59:13 GMT-3
Maybe an IRQ conflict. Look in device manager and make sure nothing else is
using IRQ 4 which is used by COM 1 or the speed for the console port on the
router is set to a different speed.
thanks,
Sanjay
----- Original Message -----
From: <Ccieyet2b@aol.com>
To: <ccielab@groupstudy.com>
Sent: Monday, May 07, 2001 6:48 PM
Subject: Troubleshooting Hyperterminal/ console connection
> Here are the (Windows 2000) hyperterminal settings:
> com 1
> bps: 9600
> parity: none
> stop bits: 1
> Flow control: none
>
> Symptoms: when the connection is made, nothing appears on the screen - no
> garbled text, just the blinking cursor. What's wrong?
>
> Com 1 is plugged into the router's console port.
>
> jim
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:36 GMT-3