From: Mohamed Heeba (MAHeeba@xxxxxxxxxxx)
Date: Tue May 08 2001 - 06:00:47 GMT-3
HI ;
the route aggregation command will summarize from one area to another based
on the area-address configured in that area ,so i guess u have to see the
aggregation of one area into the other but not both aggregation in one area
.
hope this help
> -----Original Message-----
> From: Ilya Mazhara [SMTP:willy@aspect.vyatka.ru]
> Sent: Tuesday, May 08, 2001 12:42 AM
> To: ccielab@groupstudy.com
> Subject: NLSP summariztion doesnt work - ???
>
> Hi all!
> Take a moment to look at this. all is simle and obvius
> Cut from sh run:
> []
> ipx router nlsp ar1
> distribute-sap-list 1001 in
> area-address AA00 FFFFFF00
> route-aggregation
> !
> !
> ipx router nlsp ar0
> distribute-sap-list 1001 in
> area-address 300 FFFFFF00
> log-adjacency-changes
> route-aggregation
> []
> #sh ipx ro
> 15 Total IPX routes. Up to 1 parallel paths and 16 hops allowed.
>
> Current default route is:
>
> R FFFFFFFE [02/02] via 20.0002.16e2.b6a0, 14s, Fa0/0.2
>
> NA 0 0 via 0.0000.0000.0000, Nu0
> NA 300 FFFFFF00 via 0.0000.0000.0000, Nu0 <---looks
> OK
> L 305 is the internal network
> C 20 (ISL vLAN), Fa0/0.2
> W 301 (TUNNEL), Tu1
> C AAA1 (UNKNOWN), Lo0
> C AAA2 (UNKNOWN), Lo1
>
> But AA00/24 summury isnt present in RT? Why?
> ios 12.1(5)
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:36 GMT-3