From: Mohamed Heeba (MAHeeba@xxxxxxxxxxx)
Date: Tue May 08 2001 - 05:56:31 GMT-3
hi ;
the fatkid labs in my opinion are fine ,but there is some issues comes from
time to time need to be clearified ,still the answer of my question is there
regardless of the solution posted in the answers .
the deactivate time is confusing and needs someone to clearify.
thx
> -----Original Message-----
> From: louie kouncar [SMTP:lkouncar@UU.NET]
> Sent: Monday, May 07, 2001 3:57 PM
> To: 'Mohamed Heeba'; ccielab@groupstudy.com
> Subject: RE: Fatkid 505 ,dail backup question
>
> Mohamed,
>
> I have not looked at this issue, but my experience with the Fatkid
> scenarios
> is that they have a lot of configurations that are not correct and will
> confuse you, I have stopped doing these labs because of that and I don't
> recommend them, but this is only my personal opinion and I don't mean to
> offend anyone.
>
> Thanks
>
>
>
>
> Louie J. Kouncar
> TCO3 Senior Data Center Engineer
> UUNET
> W-703-343-6645
> C-703-304-2460
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Mohamed Heeba
> Sent: Monday, May 07, 2001 5:55 PM
> To: 'ccielab@groupstudy.com'
> Subject: Fatkid 505 ,dail backup question
>
>
> guys
> in the fatkid 505 ,there is a question here
> the requirement is to config a dial backup ,the BRI will backup the serial
> link
> serial link is configured for 250k ,the BRI is supposed to be 128 k
> the requirement is to bring up the BRI when the load is 50% on the serial
> ...that is ok
> but the to tear the link down when the the load on the serial is 25% .
>
> now as i know the backup load command deactivated time is calculating the
> ratio based on the aggregated BW of both of the load on the links in
> relation to the primary link bandwidth .
> so ,if the serial is utilized up to 25% ,this means that this is load is
> actually 2/3 of the exact load .
> so the backup command should be something lik
> BACKUP LOAD 50 38 !!! (am i right )
> why the solution is showing 50 10 ?????
>
> anyone can clearify ??
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:36 GMT-3