From: louie kouncar (lkouncar@xxxxxx)
Date: Mon May 07 2001 - 19:56:38 GMT-3
Mohamed,
I have not looked at this issue, but my experience with the Fatkid scenarios
is that they have a lot of configurations that are not correct and will
confuse you, I have stopped doing these labs because of that and I don't
recommend them, but this is only my personal opinion and I don't mean to
offend anyone.
Thanks
Louie J. Kouncar
TCO3 Senior Data Center Engineer
UUNET
W-703-343-6645
C-703-304-2460
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Mohamed Heeba
Sent: Monday, May 07, 2001 5:55 PM
To: 'ccielab@groupstudy.com'
Subject: Fatkid 505 ,dail backup question
guys
in the fatkid 505 ,there is a question here
the requirement is to config a dial backup ,the BRI will backup the serial
link
serial link is configured for 250k ,the BRI is supposed to be 128 k
the requirement is to bring up the BRI when the load is 50% on the serial
...that is ok
but the to tear the link down when the the load on the serial is 25% .
now as i know the backup load command deactivated time is calculating the
ratio based on the aggregated BW of both of the load on the links in
relation to the primary link bandwidth .
so ,if the serial is utilized up to 25% ,this means that this is load is
actually 2/3 of the exact load .
so the backup command should be something lik
BACKUP LOAD 50 38 !!! (am i right )
why the solution is showing 50 10 ?????
anyone can clearify ??
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:35 GMT-3