From: Bruce Williams (bruce@xxxxxxxxxxxxxxxxxxxxxx)
Date: Sat May 05 2001 - 13:09:15 GMT-3
I have an old 2501 with 4MB of flash running IOS 9.14. I am trying to
upgrade to at least 10.22, but I cannot do a "copy tftp flash" because I get
an error message that says, "Copy aborted. Flash address space cannot be
written to" then when I do a "show flash all" it says,
"4096K bytes of Flash address space sized on CPU board. Memory type is
Flash. Flash address space access is READ-ONLY"
I have been all over Cisco's web site. I have tried "erase flash", "delete
flash" and "format flash". I must be doing something wrong. Please help me
if you can tell me how to copy a new IOS image into this router.
Bruce Williams
[mailto:bruce@williamsnetworking.com]
[GroupStudy.com removed an attachment of type application/ms-tnef which had a n
ame of winmail.dat]
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:34 GMT-3