From: Clifton Stewart (cliftonlstewart@xxxxxxxx)
Date: Fri May 04 2001 - 16:03:26 GMT-3
As a person who reads alot of books, I would recommend purchasing "Routing
TCP/IP Volume II" in place of this text. I think you'll receive more knowledge
for your money as well as complimenting volume I.
But if I recall correctly, didn't Leah from Lucent use this book as part of her
CCIE preparation before she passed in San Jose?
Author: Jeff Doyle
ISBN: 1578700892
-Cliff
"Padhu (LFG)" wrote:
> Is this so bad ? I just bought it ..Haven't thumbed thro the pges yet ...
> I'd appreciate any feedback on this so that i don't waste time doing this.
>
> Cheers,Padhu
>
> -----Original Message-----
> From: chris@pacinter.net [mailto:chris@pacinter.net]
> Sent: Friday, May 04, 2001 1:41 PM
> To: Virnoche, Phil; ccielab@groupstudy.com
> Subject: Re: Hutnik and Slattery Second Edition OSPF lab
>
> i have a idea, buy a different book
>
> ----- Original Message -----
> From: "Virnoche, Phil" <phil.virnoche@attws.com>
> To: <ccielab@groupstudy.com>
> Sent: Friday, May 04, 2001 11:16 AM
> Subject: Hutnik and Slattery Second Edition OSPF lab
>
> > Hey folks-
> >
> > First off, I want to vent a little,..... this "new" book is SOOOO full of
> > mistakes!!! I can't believe someone could put out a book like this with
> > these amount of mistakes! Do they not proof read???
> >
> > Here is my question... On the OSPF lab on R6, I am trying to get 2 summary
> > routes (summary-address 152.1.2.0 255.255.255.0 and summary-address
> > 152.1.1.0 255.255.255.0) into the IGRP domain... I have it configured
> "just
> > like the book says" but to no avail..... relevent configs and debugs
> follow:
> >
> > Any ideas?
> >
> >
> > router ospf 64
> > log-adjacency-changes
> > auto-cost reference-bandwidth 900
> > area 0 authentication message-digest
> > area 1 authentication
> > area 1 virtual-link 152.1.2.5 message-digest-key 1 md5 cisco0
> > area 2 nssa
> > summary-address 152.12.0.0 255.252.0.0
> > summary-address 152.1.2.0 255.255.255.0
> > summary-address 152.1.1.0 255.255.255.0
> > redistribute igrp 64 metric 1000
> > network 152.1.1.78 0.0.0.0 area 2
> > network 152.1.10.2 0.0.0.0 area 1
> > network 152.1.11.1 0.0.0.0 area 2
> > network 152.1.12.1 0.0.0.0 area 2
> > default-information originate always
> > distribute-list 1 in Serial0
> > !
> > router igrp 64
> > redistribute ospf 64 route-map summary
> > passive-interface BRI0
> > passive-interface Loopback0
> > passive-interface Loopback1
> > passive-interface Serial0
> > network 152.1.0.0
> > distribute-list 2 in Ethernet0
> >
> > r6#deb ip igrp trans
> > IGRP protocol debugging is on
> > r6#sh ip rou
> > Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
> > D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
> > N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
> > E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
> > i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
> > area
> > * - candidate default, U - per-user static route, o - ODR
> > P - periodic downloaded static route
> >
> > Gateway of last resort is not set
> >
> > 152.1.0.0/16 is variably subnetted, 8 subnets, 5 masks
> > O 152.1.1.128/25 [110/1030] via 152.1.10.1, 19:51:02, Serial0
> > C 152.1.11.0/24 is directly connected, Loopback0
> > C 152.1.10.0/26 is directly connected, Serial0
> > C 152.1.12.0/24 is directly connected, Loopback1
> > O IA 152.1.1.0/25 [110/1612] via 152.1.10.1, 19:51:02, Serial0
> > C 152.1.0.0/24 is directly connected, Ethernet0
> > O 152.1.2.0/30 [110/1021] via 152.1.10.1, 19:51:02, Serial0
> > O 152.1.2.4/32 [110/1022] via 152.1.10.1, 19:51:03, Serial0
> > I 152.12.0.0/16 [100/1600] via 152.1.0.2, 00:00:50, Ethernet0
> > I 152.13.0.0/16 [100/1600] via 152.1.0.2, 00:00:50, Ethernet0
> > I 152.14.0.0/16 [100/1600] via 152.1.0.2, 00:00:50, Ethernet0
> > I 152.15.0.0/16 [100/1600] via 152.1.0.2, 00:00:50, Ethernet0
> > O 152.12.0.0/14 is a summary, 19:50:54, Null0
> > r6#
> > *Mar 1 20:29:55.526: IGRP: sending update to 255.255.255.255 via
> Ethernet0
> > (152 .1.0.1)
> > *Mar 1 20:29:55.534: subnet 152.1.11.0, metric=501
> > *Mar 1 20:29:55.534: subnet 152.1.12.0, metric=501
> > r6#
> > *Mar 1 20:30:04.106: IGRP: received update from 152.1.0.2 on Ethernet0
> > *Mar 1 20:30:04.106: network 152.10.0.0, metric 1600 (neighbor 501)
> > *Mar 1 20:30:04.110: network 152.11.0.0, metric 1600 (neighbor 501)
> > *Mar 1 20:30:04.114: network 152.12.0.0, metric 1600 (neighbor 501)
> > *Mar 1 20:30:04.118: network 152.13.0.0, metric 1600 (neighbor 501)
> > *Mar 1 20:30:04.122: network 152.14.0.0, metric 1600 (neighbor 501)
> > *Mar 1 20:30:04.122: network 152.15.0.0, metric 1600 (neighbor 501)
> > *Mar 1 20:30:04.126: network 152.16.0.0, metric 1600 (neighbor 501)
> > r6#
> > r6#
> >
> > Philip G. Virnoche
> > Sr. Network Engineer - AT&T Wireless
> > phone: 425.580.5239
> > cell: 206.601.3134
> >
> > "HAM AND EGGS - A day's work for a chicken; A lifetime commitment for a
> > pig."
> >
> >
> > -----Original Message-----
> > From: tom cheung [mailto:tkc9789@hotmail.com]
> > Sent: Friday, May 04, 2001 4:53 AM
> > To: hhlin@szskzj.com; ccielab@groupstudy.com
> > Subject: Re: How to delete CAM entries marked 'Port Security Entry'
> >
> >
> > set port security 2/17 disable
> >
> >
> > >From: "Haohong Lin" <hhlin@szskzj.com>
> > >Reply-To: "Haohong Lin" <hhlin@szskzj.com>
> > >To: "CCIELab" <ccielab@groupstudy.com>
> > >Subject: How to delete CAM entries marked 'Port Security Entry'
> > >Date: Fri, 4 May 2001 16:04:14 +0800
> > >
> > >Hi,
> > >
> > > I can't delete some static entries in cam table, as show in
> following.
> >
> > >I
> > >find no command corelatively via show conf all .
> > > I have pressed "set arp" command before, which maybe results in such
> > >situation. After entered with "set arp ...", no commands are correlating
> > >with it in nvram config.
> > >
> > > Any advice is welcome, thanks in advance
> > >
> > >Cat5k> (enable) sh cam stat
> > >* = Static Entry. + = Permanent Entry. # = System Entry. R = Router
> Entry.
> > >X = Port Security Entry
> > >
> > >VLAN Dest MAC/Route Des [CoS] Destination Ports or VCs / [Protocol
> > >Type]
> > >---- ------------------ -----
> > >-----------------------------------------
> > >--
> > >1 00-08-ca-fe-ca-fe X 2/17
> > >1 00-10-7b-3a-26-ee X 2/17
> > >Total Matching CAM Entries Displayed = 2
> > >Cat5k> (enable)
> > >
> > >
> > >
> > >regards,
> > >
> > >Haohong Lin
> > >**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:34 GMT-3