From: Ken Yeo (kenyeo@xxxxxxxxxxxxxxx)
Date: Thu May 03 2001 - 14:36:04 GMT-3
Hi Devender,
In your R2, add
inter to 0
source-bridge spanning
This command enable spanning tree explorer.
Ken
----- Original Message -----
From: "Devender Singh" <devender.singh@cmc.cwo.net.au>
To: "Ccielab@Groupstudy. Com (E-mail)" <ccielab@groupstudy.com>
Sent: Wednesday, May 02, 2001 8:31 PM
Subject: SR/TLB: Layer 3 traffic over SR/TLB
> Hi all,
>
>
> Can someone tell me what are the issues for layer 3 traffic over SR/TLB
and
> point me in right direction.I am tring to get my ipx or ip(pings) through
> SR/TLB, but haven't got any success till now.
>
> ************** r1 ******************
> !
> interface Loopback0
> no ip address
> ipx network 600
> !
> interface Ethernet0
> ip address 10.10.10.10 255.255.255.0
> ipx network 888
> !
> ************** R3 *****************
> !
> interface TokenRing0
> ip address 10.10.10.20 255.255.255.0
> no ip directed-broadcast
> ipx network 888
> ring-speed 16
> multiring all <----- I tried removing it
> !
> ************** R2 *****************
> !
> source-bridge ring-group 100
> source-bridge transparent 100 10 1 91
> !
> !
> interface Ethernet0
> no ip address
> bridge-group 91
> !
> interface TokenRing0
> no ip address
> ring-speed 16
> multiring all <----- same effect with or without
> source-bridge 20 1 100
>
> !
> bridge 91 protocol ieee
> bridge 91 priority 64000
> bridge 91 bitswap-layer3-addresses <---- got this one from study group
> ********
> R2#sh source
>
> Local Interfaces: receive transmit
> srn bn trn r p s n max hops cnt cnt drops
> To0 20 1 100 * b 7 7 7 0 0 0
>
> Global RSRB Parameters:
> TCP Queue Length maximum: 100
>
> Ring Group 100:
> No TCP peername set, TCP transport disabled
> Maximum output TCP queue length, per peer: 100
> Rings:
> bn: 1 rn: 20 local ma: 4007.0dc6.1d36 TokenRing0 fwd: 0
> bn: 1 rn: 10 locvrt ma: 4007.0dc6.1db6 Bridge-group 91 fwd: 0
>
> Explorers: ---- input ------- ------- output -------
> spanning all-rings total spanning all-rings total
> To0 0 0 0 0 0 0
>
> Explorer fastswitching enabled
> Local switched: 29 flushed 0 max Bps 38400
>
> rings inputs bursts throttles output drops
> To0 0 0 0 0
> ***************************************
> R2#sh bridge
>
> Total of 300 station blocks, 299 free
> Codes: P - permanent, S - self
>
> Bridge Group 91:
>
> Address Action Interface Age RX count TX count
> 0000.0c75.a8f6 forward Ethernet0 0 15 0
> ****************************************************************
>
> Thanks in advance.
>
> Devender Singh
> BE(Hons), CCNP
> IP Solution Specialist
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:33 GMT-3