From: Devender Singh (devender.singh@xxxxxxxxxxxxxx)
Date: Sun May 06 2001 - 20:12:59 GMT-3
Thanks Mas and Ken,
Yes it works now. Mas, as you said routing on SR/TLB router has to be off.
best regards
Devender Singh
BE(Hons), CCNP
IP Solution Specialist
-----Original Message-----
From: Mas Kato [mailto:tealp729@home.com]
Sent: Thursday, 3 May 2001 4:43
To: 'Devender Singh'; 'Ccielab@Groupstudy. Com (E-mail)'
Subject: RE: SR/TLB: Layer 3 traffic over SR/TLB
Devender,
Try leaving the 'multiring' command on R3/to0 and adding 'source-bridge
spanning' to R2/to0.
Hope this helps,
Mas Kato
P.S. We took the same OSPF/BGP class in San Jose, didn't we?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Devender Singh
Sent: Wednesday, May 02, 2001 6:31 PM
To: Ccielab@Groupstudy. Com (E-mail)
Subject: SR/TLB: Layer 3 traffic over SR/TLB
Hi all,
Can someone tell me what are the issues for layer 3 traffic over SR/TLB
and
point me in right direction.I am tring to get my ipx or ip(pings)
through
SR/TLB, but haven't got any success till now.
************** r1 ******************
!
interface Loopback0
no ip address
ipx network 600
!
interface Ethernet0
ip address 10.10.10.10 255.255.255.0
ipx network 888
!
************** R3 *****************
!
interface TokenRing0
ip address 10.10.10.20 255.255.255.0
no ip directed-broadcast
ipx network 888
ring-speed 16
multiring all <----- I tried removing it
!
************** R2 *****************
!
source-bridge ring-group 100
source-bridge transparent 100 10 1 91
!
!
interface Ethernet0
no ip address
bridge-group 91
!
interface TokenRing0
no ip address
ring-speed 16
multiring all <----- same effect with or without
source-bridge 20 1 100
!
bridge 91 protocol ieee
bridge 91 priority 64000
bridge 91 bitswap-layer3-addresses <---- got this one from study group
********
R2#sh source
Local Interfaces: receive transmit
srn bn trn r p s n max hops cnt cnt drops
To0 20 1 100 * b 7 7 7 0 0 0
Global RSRB Parameters:
TCP Queue Length maximum: 100
Ring Group 100:
No TCP peername set, TCP transport disabled
Maximum output TCP queue length, per peer: 100
Rings:
bn: 1 rn: 20 local ma: 4007.0dc6.1d36 TokenRing0 fwd: 0
bn: 1 rn: 10 locvrt ma: 4007.0dc6.1db6 Bridge-group 91 fwd: 0
Explorers: ---- input ------- ------- output -------
spanning all-rings total spanning all-rings total
To0 0 0 0 0 0 0
Explorer fastswitching enabled
Local switched: 29 flushed 0 max Bps 38400
rings inputs bursts throttles output drops
To0 0 0 0 0
***************************************
R2#sh bridge
Total of 300 station blocks, 299 free
Codes: P - permanent, S - self
Bridge Group 91:
Address Action Interface Age RX count TX count
0000.0c75.a8f6 forward Ethernet0 0 15 0
****************************************************************
Thanks in advance.
Devender Singh
BE(Hons), CCNP
IP Solution Specialist
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:35 GMT-3