From: Padhu (LFG) (padhu@xxxxxxxxxxxx)
Date: Thu May 03 2001 - 10:55:36 GMT-3
1. Identify nets on AS2WEST ..
Create ACL to match those nets -Create route map - Set Med out towards
ebgp neigbor AS1
2.Identify nets on AS2EAST ..
Create ACL to match those nets -Create route map - Set Med out towards
ebgp neigbor AS1
Rob, Can you throw some light how to use AS-Path to accomplish the same
...Given that
AS2WEST & AS2EAST are IBGP peers.. prepending to as-path will effect only
with EBGP..
Cheers,Padhu
-----Original Message-----
From: Rob Hopkins [mailto:rshopkins@earthlink.net]
Sent: Thursday, May 03, 2001 2:28 AM
To: JAY; ccielab@groupstudy.com
Subject: Re: set MEDs on BGP
you may want to modify your AS path for as2west routes (from as2east) and
vice versa
----- Original Message -----
From: "JAY" <JInciong@earthlink.net>
To: <ccielab@groupstudy.com>
Sent: Thursday, May 03, 2001 3:03 AM
Subject: set MEDs on BGP
> AS1------ebgp-----AS2EAST
> |
> ebgp
> |
> AS2WEST
>
> AS2WEST AND AS2EAST ARE IBGP PEERS.
>
>
> Question:
>
> I have networks on AS2WEST. I want routes destined for certain networks
to
> take AS2WEST and some to take AS2EAST.
>
> After setting MEDs, would I have to create an access list for each
network?
>
> TIA
>
> JAY
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:33 GMT-3