From: Gabriel.Neagoe@xxxxxx
Date: Thu May 03 2001 - 05:29:15 GMT-3
use "escape-character" command in one of the "line" configurations to change
the ctrl-shift-6 combination to something eles on one of the routers
however, i have never succeeded in making it work
anybody did it ?
-----------------------------------------------
Gabriel Neagoe, GN379-RIPE
Networking solutions consultant
Cisco Certified Network Professional
Cisco Certified Design Associate
S&T Romania
tel: +401 20 40 300
fax: +401 20 40 310
-----------------------------------------------
> -----Original Message-----
> From: andrew.2.shore@bt.com [SMTP:andrew.2.shore@bt.com]
> Sent: Thursday, May 03, 2001 10:46 AM
> To: ccielab@groupstudy.com
> Subject: telnet -> telnet -> telnet
>
> Gang
>
> R1 ----> R2 ----> R3
>
> If I have three routers and telnet from R1 to R2 then reverse telnet to R3
> is there a way to get back to R2. For security reasons it is not possible
> to
> telnet directly to R2.
>
> CNTR Shift 6 X takes me back to R1 !
>
> I have a real world situation where I need to use R2 (terminal server) to
> do
> config work on 48 new devices and just flicking between them would make
> life
> so much easier.
>
> Thanks,
>
>
> Andrew Shore
> BTcd
> Information Systems Engineering
> Internet & Multimedia
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:33 GMT-3