From: Dan (dp595@xxxxxxxxxxxxx)
Date: Sun Apr 29 2001 - 00:40:34 GMT-3
This is just a shot in the dark, but I'm pretty sure the newer IOS uses the
Cisco IPX echo, which is not compatible with the Novell IPX echo. If you're
router is sending Novell IPX pings/echoes, then make sure the router you
are pinging is set to Novell echo as well or set them both to Cisco.
Just a thought.
Dan Pontrelli
Customer Installation Engineer - Verio NYC
CCNP, MCSE, CNA
----- Original Message -----
From: "Mohamed Heeba" <MAHeeba@itqan.co.ae>
To: <ccielab@groupstudy.com>
Sent: Friday, April 27, 2001 3:40 PM
Subject: IPX/ISDN problem
> guys ;
> im trying a simple scenario to run IPX over ISDN and i got a problem
> one of the routers is not able to send broadcast to its BRI interface .
> when i enabled the ipx packet debug i got "encapsultaion failure message"
>
> the router has a dialer map to the other router with broadcast keyward
,the
> network addresses are all fine and the interesting traffic is defined
well
> when i tried to ping ipx the other end i got
> NOVELL: cannot send echo !
> this router which creates the problem has IOS 11.0
> anyone knows why this happening
> note :the router can receive the updates without problems but it cannot
send
> .
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:00 GMT-3