From: Erick B. (erickbe@xxxxxxxxx)
Date: Sat Apr 28 2001 - 15:43:14 GMT-3
>From my experience, chap goes on BRI also. There was a
recent posting on the list I believe which described
how auth works in more detail. If I recall, PPP
authenticates then it passes it to dialer profile.
This is because dialer profiles might be based on
names, profiles, etc. It makes since.
I did overlook the isdn q931 debug info you posted
originally, and that looks like a ISDN switch issue
perhaps. Is this a simulator? Did it work before?
--- "Moran, Ed" <morane@telecomsys.com> wrote:
> The dialer-list is there, I just forgot to put it
> in the post. So I have to
> have "ppp auth chap" on the BRI even though I'm
> using Dialer Profiles on R4?
> I do have it in the Dialer0 interface.
>
> -----Original Message-----
> From: Erick B.
> To: Moran, Ed; 'bernard.moreon@socgen.co.uk '
> Cc: ''ccielab@groupstudy.com' '
> Sent: 4/28/01 2:04 PM
> Subject: RE: ISDN Connection Problem
>
> You're missing a dialer-list globally (I don't see
> it
> below), and R4 doesn't have ppp auth chap on BRI
> interface.
>
> If you can capture 'debug isdn q931', 'debug ppp
> nego'
> that would be helpful.
>
> Erick
>
> --- "Moran, Ed" <morane@telecomsys.com> wrote:
> > Here are the relevant configs from both routers.
> I
> > am getting the TEI and
> > the SPIDS are valid, the call just won't go
> through.
> >
> > hostname R3
> > !
> > enable password cisco
> > !
> > username R4 password 0 cisco
> > ip subnet-zero
> > no ip domain-lookup
> > ipx routing 0003.0003.0003
> > ipx internal-network 3
> > isdn switch-type basic-ni
> > !
> > interface BRI0
> > ip address 139.5.12.13 255.255.255.252
> > no ip directed-broadcast
> > encapsulation ppp
> > dialer map ip 139.5.12.14 name R4 broadcast
> 8358662
> > dialer-group 1
> > isdn switch-type basic-ni
> > isdn spid1 0835866101
> > isdn spid2 0835866301
> > ppp authentication chap
> >
> >
>
------------------------------------------------------------------------
> --
> > hostname R4
> > !
> > enable password cisco
> > !
> > username R3 password 0 cisco
> > ip subnet-zero
> > no ip domain-lookup
> > ipx routing 0004.0004.0004
> > ipx internal-network 4
> > isdn switch-type basic-ni
> > !
> > interface BRI0
> > no ip address
> > no ip directed-broadcast
> > encapsulation ppp
> > dialer pool-member 1
> > isdn switch-type basic-ni
> > isdn spid1 0835866201
> > isdn spid2 0835866401
> > !
> > interface Dialer0
> > ip address 139.5.12.14 255.255.255.252
> > no ip directed-broadcast
> > encapsulation ppp
> > dialer remote-name R3
> > dialer string 8358661
> > dialer pool 1
> > dialer-group 1
> > ppp authentication chap
> >
> > -----Original Message-----
> > From: bernard.moreon@socgen.co.uk
> > To: Moran, Ed
> > Cc: 'ccielab@groupstudy.com'
> > Sent: 4/28/01 1:29 PM
> > Subject: Re: ISDN Connection Problem
> >
> >
> >
> > Could you post the config?
> > I'm suspecting a dialer profile configuration witt
> a
> > missing dialer pool
> > command
> > under the dialer interface or bri interface.
> >
> > Bernard
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:00 GMT-3