From: Moran, Ed (morane@xxxxxxxxxxxxxx)
Date: Sat Apr 28 2001 - 16:26:09 GMT-3
The SPIDS are valid and there is no problem there. I will try rebotting the
simulator (BlackBox) and see what happens.
-----Original Message-----
From: Michael Herald
To: 'Moran, Ed'
Sent: 4/28/01 2:57 PM
Subject: RE: ISDN Connection Problem
Ed,
The spids have been entered incorrectly. In the debug, it says there was
a SPID rejected ....
Do a "show isdn status". You should see (similar to, depending on
switch):
r1-2504#show isdn status
The current ISDN Switchtype = basic-dms100
ISDN BRI0 interface
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 126, State = MULTIPLE_FRAME_ESTABLISHED
TEI = 65, State = MULTIPLE_FRAME_ESTABLISHED
Spid Status:
TEI 126, ces = 1, state = 5(init)
spid1 configured, spid1 sent, spid1 valid
Endpoint ID Info: epsf = 0, usid = 2, tid = 1
TEI 65, ces = 2, state = 5(init)
spid2 configured, spid2 sent, spid2 valid
Endpoint ID Info: epsf = 0, usid = 4, tid = 1
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 0 CCBs = 0
Total Allocated ISDN CCBs = 0
-----Original Message-----
From: Moran, Ed [SMTP:morane@telecomsys.com]
Sent: Saturday, April 28, 2001 12:10 PM
To: 'ccielab@groupstudy.com'
Subject: ISDN Connection Problem
I am having problems connecting 2 routers via ISDN. Here is the 'deb
isdn
q931' output. Can anyone tell me what the problem is? If needed, I will
post
my configs.
R3#deb isdn q931
ISDN Q931 packets debugging is on
R3#ping 139.5.12.14
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 139.5.12.14, timeout is 2 seconds:
3d15h: ISDN BR0: TX -> SETUP pd = 8 callref = 0x17
3d15h: Bearer Capability i = 0x8890
3d15h: Channel ID i = 0x83
3d15h: Keypad Facility i = '8358662'
3d15h: ISDN BR0: RX <- RELEASE_COMP pd = 8 callref = 0x97
3d15h: Cause i = 0x82A2 - No channel available
3d15h: ISDN BR0: Setup was rejected, cause = 22.....
Success rate is 0 percent (0/5)
R3#
Ed
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:00 GMT-3