From: Mike Hennigan (Mikeh@xxxxxxxxx)
Date: Sat Apr 28 2001 - 14:37:06 GMT-3
>From what i have seen in the past this is generally a problem with the ISDN sw
itch/simulator depending on what you are using. Usually a reboot of the switch/
simulator works (in the test enviorment) if this is w/a telco you will need to
call them.
>>> "Moran, Ed" <morane@telecomsys.com> 04/28/01 01:09PM >>>
I am having problems connecting 2 routers via ISDN. Here is the 'deb isdn
q931' output. Can anyone tell me what the problem is? If needed, I will post
my configs.
R3#deb isdn q931
ISDN Q931 packets debugging is on
R3#ping 139.5.12.14
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 139.5.12.14, timeout is 2 seconds:
3d15h: ISDN BR0: TX -> SETUP pd = 8 callref = 0x17
3d15h: Bearer Capability i = 0x8890
3d15h: Channel ID i = 0x83
3d15h: Keypad Facility i = '8358662'
3d15h: ISDN BR0: RX <- RELEASE_COMP pd = 8 callref = 0x97
3d15h: Cause i = 0x82A2 - No channel available
3d15h: ISDN BR0: Setup was rejected, cause = 22.....
Success rate is 0 percent (0/5)
R3#
Ed
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:00 GMT-3