From: Moran, Ed (morane@xxxxxxxxxxxxxx)
Date: Sat Apr 28 2001 - 14:52:17 GMT-3
Here are the relevant configs from both routers. I am getting the TEI and
the SPIDS are valid, the call just won't go through.
hostname R3
!
enable password cisco
!
username R4 password 0 cisco
ip subnet-zero
no ip domain-lookup
ipx routing 0003.0003.0003
ipx internal-network 3
isdn switch-type basic-ni
!
interface BRI0
ip address 139.5.12.13 255.255.255.252
no ip directed-broadcast
encapsulation ppp
dialer map ip 139.5.12.14 name R4 broadcast 8358662
dialer-group 1
isdn switch-type basic-ni
isdn spid1 0835866101
isdn spid2 0835866301
ppp authentication chap
--------------------------------------------------------------------------
hostname R4
!
enable password cisco
!
username R3 password 0 cisco
ip subnet-zero
no ip domain-lookup
ipx routing 0004.0004.0004
ipx internal-network 4
isdn switch-type basic-ni
!
interface BRI0
no ip address
no ip directed-broadcast
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-ni
isdn spid1 0835866201
isdn spid2 0835866401
!
interface Dialer0
ip address 139.5.12.14 255.255.255.252
no ip directed-broadcast
encapsulation ppp
dialer remote-name R3
dialer string 8358661
dialer pool 1
dialer-group 1
ppp authentication chap
-----Original Message-----
From: bernard.moreon@socgen.co.uk
To: Moran, Ed
Cc: 'ccielab@groupstudy.com'
Sent: 4/28/01 1:29 PM
Subject: Re: ISDN Connection Problem
Could you post the config?
I'm suspecting a dialer profile configuration witt a missing dialer pool
command
under the dialer interface or bri interface.
Bernard
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:00 GMT-3