From: Martin, Chris (chris@xxxxxxxxxxxx)
Date: Fri Apr 27 2001 - 18:33:19 GMT-3
Yes, you can use the max-paths command to have up to 6 paths of equal cost.
However, you can also use the Variance command to allow traffic to cross
other paths of equal cost.
----- Original Message -----
From: "Michelle T" <mtruman@mn.mediaone.net>
To: "Martin, Chris" <chris@pacinter.net>; <ccielab@groupstudy.com>
Sent: Friday, April 27, 2001 2:36 PM
Subject: RE: Limit to Static Routes?
> For eigrp, isn't there a limit of 6 paths though? (Max-paths)
>
> -----Original Message-----
> From: Martin, Chris [mailto:chris@pacinter.net]
> Sent: Friday, April 27, 2001 4:20 PM
> To: Michelle T; ccielab@groupstudy.com
> Subject: Re: Limit to Static Routes?
>
>
> Michelle:
> By default EIGRP load balances across equal cost paths.
> There is not a limit on how many static routes you can add.
>
>
> ----- Original Message -----
> From: "Michelle T" <mtruman@mn.mediaone.net>
> To: <ccielab@groupstudy.com>
> Sent: Friday, April 27, 2001 2:07 PM
> Subject: Limit to Static Routes?
>
>
> > Is there any limit to the number of next hop equal cost paths you can
have
> > when using static routes? I know if you are using eigrp or BGP or other
> > IGP's you have a limit of 6 next hops per route. But what if you have
> eight
> > default static routes pointing to 8 different serial ports. Can you load
> > balance across all eight paths?
> >
> >
> > Michelle Truman
> > **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:59 GMT-3