From: Pat Bodin (pbodin@xxxxxxxxx)
Date: Thu Apr 26 2001 - 12:59:43 GMT-3
I'm working with CLIP on a LS1010 and 2 routers. I have completed ATM 1577
with pvcs and have no problem with config below.
r1
interface ATM0
ip address 10.1.1.1 255.255.255.0
pvc 2/32
protocol ip 10.1.1.2
ubr+ 100000 50000
ls1010
interface atm0/1/1
atm pvc 2 32 interface atm 0/1/0 3 33
r2
interface ATM0
ip address 10.1.1.2 255.255.255.0
pvc 3/33
protocol ip 10.1.1.1
ubr+ 100000 50000
However, when I tried CLIP. I don't know exactly what I have to have on the
LS1010. Can someone tell me the exact commands to put on that switch to get
this to work? Also, where do I get the atm esi-add?
Example config for routers
interface ATM0
ip address 10.1.1.1 255.255.255.0
no ip directed-broadcast
atm esi-address 111111111111.03
nsap arp address 47.0091.8100.0000.0060.3e5b.6201.0060.3e5b.6201.00
atm ilmi-keepalive
pvc 0/5 qsaal
pvc 0/16 ilmi
Any help you can give me is greatly appreciated!
|| || Pat Bodin
.||. .||. Systems Engineer
.||||. .||||. pbodin@cisco.com
.:||||||||:.:||||||||:. ph: 678-352-2905
C i s c o S y s t e m s fax: 678-352-2936
pager: 800-365-4578
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:59 GMT-3