From: Mas Kato (tealp729@xxxxxxxx)
Date: Thu Apr 26 2001 - 15:11:50 GMT-3
Indeed... Perhaps the protocols need to go to two different
destinations?
Dan, it sounds like the IPX dialer interface has decided that the
traffic is interesting, has allocated a B-channel and initiated the
dial. Do 'debug isdn q931,' 'debug ppp negotiation' and 'debug ppp
authentication' reveal anything interesting?
Regards,
Mas Kato
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Chris Mott
Sent: Thursday, April 26, 2001 6:36 AM
To: CCIE; Dan Skiptunas
Subject: RE: ISDN and Dialer profiles
why not use both IPX and IP on the same Dialer interface? that's the
way I
would do it .. the main reason for multiple dialers is multiple
destinations, not multiple protocols ... perhaps there's something in
the
design of your lab that dictates this, I dunno ... does anyone else know
about this?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Dan Skiptunas
Sent: Thursday, April 26, 2001 11:20 AM
To: ccielab@groupstudy.com
Subject: ISDN and Dialer profiles
I am trying to use dialer interfaces to allow 1 bri to be used to
support
IP on 1 dialer interface and IPX on the other. When I configure dialer
interface 0 for IP everything works fine when I add dialer interface 1
with
IPX address the connection connects for 1 or 2 seconds than disconnects
this
is happening for both interfaces I have tried using different dialer
pool
but this has had no effect. When I remove int dialer 1 , dialer 0
returns
to normal. Does some have a config that works or know what I am
missing ?
Dan Skiptunas
Network Engineer
NEC-BNS
Office :203-461-9200 ex.421
Pager : 888.672.8636
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:58 GMT-3