From: Dan Skiptunas (dskiptunas@xxxxxxxxxx)
Date: Thu Apr 26 2001 - 13:19:33 GMT-3
I am trying to use dialer interfaces to allow 1 bri to be used to support
IP on 1 dialer interface and IPX on the other. When I configure dialer
interface 0 for IP everything works fine when I add dialer interface 1 with
IPX address the connection connects for 1 or 2 seconds than disconnects this
is happening for both interfaces I have tried using different dialer pool
but this has had no effect. When I remove int dialer 1 , dialer 0 returns
to normal. Does some have a config that works or know what I am missing ?
Dan Skiptunas
Network Engineer
NEC-BNS
Office :203-461-9200 ex.421
Pager : 888.672.8636
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:56 GMT-3