From: Tariq Sharif (tariq_sharif@xxxxxxxxxxxxxx)
Date: Thu Apr 26 2001 - 15:38:11 GMT-3
I tried same config on a sub interface. That was fine. So, I think the issue
is to do with " ip ospf network point-to-multipoint" being on the pysical
in??
Many thanks & regards.
Tariq Sharif
-----Original Message-----
From: Padhu (LFG) [mailto:padhu@steinroe.com]
Sent: 26 April 2001 18:19
To: 'Tariq Sharif'; Ccielab@Groupstudy. Com
Subject: RE: OSPF Over ATM
Did you try with a different IOS also ? replace ospf with EIGRP ..see if the
issue persists..then try a higher rev ...I don't know if i saw this on 12.07
...
-----Original Message-----
From: Tariq Sharif [mailto:tariq_sharif@btinternet.com]
Sent: Thursday, April 26, 2001 7:12 AM
To: Ccielab@Groupstudy. Com
Subject: OSPF Over ATM
I've got couple ATM routers configured with Classical IP. I'm running OSPF
over the ATM & ethernet interfaces. The issue/question is: OSPF routes do
not stay permanently in the routing table. They appear & disappear. Is this
anything to do with SVC being established & cleared? Please see the configs:
Many thanks & regards.
Tariq Sharif
hostname r7
!
ip subnet-zero
ipx routing 00d0.58ec.25c1
!
interface Ethernet0/0
ip address 2.2.2.2 255.0.0.0
no ip directed-broadcast
ipx network 7
!
interface ATM1/0
ip address 200.200.200.202 255.255.255.0
no ip directed-broadcast
ip ospf network point-to-multipoint
atm esi-address 000000000007.07
no atm ilmi-keepalive
atm arp-server nsap 47.009181000000006170594D01.000000000008.08
pvc signal 0/5 qsaal
!
pvc ilmi 0/16 ilmi
!
!
svc for_ipx nsap 47.009181000000006170594D01.000000000008.08
protocol ipx 78.0003.e3d4.6f81 broadcast
!
ipx network 78
!
router ospf 1
network 0.0.0.0 255.255.255.255 area 0
end
hostname r8
!
ip subnet-zero
ip tcp synwait-time 5
no ip domain-lookup
!
ipx routing 0003.e3d4.6f81
cns event-service server
!
interface FastEthernet0/0
ip address 1.1.1.1 255.0.0.0
no ip directed-broadcast
duplex auto
speed auto
ipx network 8
!
interface FastEthernet0/1
no ip address
no ip directed-broadcast
shutdown
duplex auto
speed auto
!
interface ATM1/0
ip address 200.200.200.201 255.255.255.0
no ip directed-broadcast
ip ospf network point-to-multipoint
atm esi-address 000000000008.08
no atm ilmi-keepalive
atm arp-server self
pvc signal 0/5 qsaal
!
pvc ilmi 0/16 ilmi
!
!
svc for_ipx nsap 47.009181000000006170594D01.000000000007.07
protocol ipx 78.00d0.58ec.25c1 broadcast
!
ipx network 78
!
router ospf 1
network 0.0.0.0 255.255.255.255 area 0
end
[GroupStudy.com removed an attachment of type application/ms-tnef which had
a name of winmail.dat]
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:57 GMT-3