RE: Cat5k and octpus cable

From: louie kouncar (lkouncar@xxxxxx)
Date: Thu Apr 26 2001 - 01:47:45 GMT-3

Next message: Erick B.: "Re: bring up Administrativly down interfaces"
Previous message: Jason1: "Re: Cisco VP Arrested - Former VP (get it right)"
Maybe in reply to: Mike Hennigan: "Cat5k and octpus cable"
Next in thread: Bob Dixon: "Re: Cat5k and octpus cable"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Andrew,

I am sorry but you are incorrect, I have the same setup 2511 and a cat 5500
with SUP III, and I have it working just fine,
all you have to do is use a coupler and it will get the job done.

Thanks

Louie J. Kouncar
TCO3 Senior Data Center Engineer
UUNET
W-703-343-6645
C-703-304-2460

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Andrew
Sent: Thursday, April 26, 2001 12:24 AM
To: Mike Hennigan; ccielab@groupstudy.com
Subject: Re: Cat5k and octpus cable

No. You need a straight-through ethernet/cat5 cable.

At 11:52 PM 4/25/01 -0400, Mike Hennigan wrote:
>is there anyway to make the cat 5k w/a sup III use the console cable from
>an octupus calbe connected to a 2511?
>**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html

Next message: Erick B.: "Re: bring up Administrativly down interfaces"
Previous message: Jason1: "Re: Cisco VP Arrested - Former VP (get it right)"
Maybe in reply to: Mike Hennigan: "Cat5k and octpus cable"
Next in thread: Bob Dixon: "Re: Cat5k and octpus cable"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:56 GMT-3