From: Haohong Lin (hhlin@xxxxxxxxxx)
Date: Mon Apr 23 2001 - 22:35:02 GMT-3
I delete both routing process and type in again, this time using clause "
redistribute ospf 10 metric 20 match internal external 1 external 2" on
is-is process. It works.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Haohong Lin
Sent: 2001 04 24 7:25
To: Padhu (LFG)
Cc: CCIELab; vshchutski@yahoo.com
Subject: RE: ISIS redistribution
Sorry, It's spelling mistakes.
" network 150.10.10.1 0.0.0.0 area 0" should change to "net 10.50.1.1
0.0.0.0 are 0".
In OSPF domain, the subnet on F0/0 works fine.
After I reload the routers, 10.50.0.0/16 subnet still absents on ISIS
domain. I don't know what's wrong with.
Regards,
Haohong Lin
-----Original Message-----
From: Padhu (LFG) [mailto:padhu@steinroe.com]
Sent: 2001 04 23 20:55
To: 'Haohong Lin'; CCIELab
Subject: RE: ISIS redistribution
Lin,
interface FastEthernet0/0 is a connected interface..Try redistribute
connected...
Also just curious ....where is network 150.10.10.1 being used ? which
interface ?
Cheers,Padhu
-----Original Message-----
From: Haohong Lin [mailto:hhlin@szskzj.com]
Sent: Sunday, April 22, 2001 8:59 PM
To: CCIELab
Subject: ISIS redistribution
Hi,
When I did route redistribution between ISIS and OSPF, I found the
interface without "ip router isis" could not disperse to the ISIS domain on
the router performing route redistribution. How to solve this problem?
Config:
interface FastEthernet0/0
ip address 10.50.1.1 255.255.0.0
<-- without "ip router isis" -->
!
interface Serial0/0
encapsulation frame-relay
frame-relay lmi-type ansi
!
interface Serial0/0.1 point-to-point
ip address 10.15.1.2 255.255.0.0
ip router isis
frame-relay interface-dlci 501
<-- On the other side of frame relay router peer could not see the connected
route "10.50.0.0" ????-->
!
router ospf 10
redistribute isis metric 100 metric-type internal level-2
network 150.10.10.1 0.0.0.0 area 0
!
router isis
redistribute ospf 10 metric 10
net 00.0200.0000.0000.0500
!
regards,
Haohong Lin
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:54 GMT-3