From: Vladimir Shchutski (vshchutski@xxxxxxxxx)
Date: Tue Apr 24 2001 - 13:48:41 GMT-3
Just put "net 10.50.0.0 0.0.255.255 area 0" instead
of "net 10.50.1.1 0.0.0.0 area 0". It should help.
NEVER use "0.0.0.0" wildcard unless you really have
32bits-length network mask.
Regards,
Vladimir.
--- Haohong Lin <hhlin@szskzj.com> wrote:
> Sorry, It's spelling mistakes.
> " network 150.10.10.1 0.0.0.0 area 0" should change
> to "net 10.50.1.1
> 0.0.0.0 are 0".
> In OSPF domain, the subnet on F0/0 works fine.
>
> After I reload the routers, 10.50.0.0/16 subnet
> still absents on ISIS
> domain. I don't know what's wrong with.
>
> Regards,
>
> Haohong Lin
>
>
> -----Original Message-----
> From: Padhu (LFG) [mailto:padhu@steinroe.com]
> Sent: 2001 04 23 20:55
> To: 'Haohong Lin'; CCIELab
> Subject: RE: ISIS redistribution
>
>
> Lin,
> interface FastEthernet0/0 is a connected
> interface..Try redistribute
> connected...
> Also just curious ....where is network 150.10.10.1
> being used ? which
> interface ?
>
> Cheers,Padhu
>
> -----Original Message-----
> From: Haohong Lin [mailto:hhlin@szskzj.com]
> Sent: Sunday, April 22, 2001 8:59 PM
> To: CCIELab
> Subject: ISIS redistribution
>
>
> Hi,
>
> When I did route redistribution between ISIS
> and OSPF, I found the
> interface without "ip router isis" could not
> disperse to the ISIS domain on
> the router performing route redistribution. How to
> solve this problem?
>
> Config:
> interface FastEthernet0/0
> ip address 10.50.1.1 255.255.0.0
> <-- without "ip router isis" -->
> !
> interface Serial0/0
> encapsulation frame-relay
> frame-relay lmi-type ansi
> !
> interface Serial0/0.1 point-to-point
> ip address 10.15.1.2 255.255.0.0
> ip router isis
> frame-relay interface-dlci 501
> <-- On the other side of frame relay router peer
> could not see the connected
> route "10.50.0.0" ????-->
> !
> router ospf 10
> redistribute isis metric 100 metric-type internal
> level-2
> network 150.10.10.1 0.0.0.0 area 0
> !
> router isis
> redistribute ospf 10 metric 10
> net 00.0200.0000.0000.0500
> !
>
>
> regards,
>
> Haohong Lin
> **Please
> read:http://www.groupstudy.com/list/posting.html
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:54 GMT-3