From: Padhu (LFG) (padhu@xxxxxxxxxxxx)
Date: Mon Apr 23 2001 - 09:55:19 GMT-3
Lin,
interface FastEthernet0/0 is a connected interface..Try redistribute
connected...
Also just curious ....where is network 150.10.10.1 being used ? which
interface ?
Cheers,Padhu
-----Original Message-----
From: Haohong Lin [mailto:hhlin@szskzj.com]
Sent: Sunday, April 22, 2001 8:59 PM
To: CCIELab
Subject: ISIS redistribution
Hi,
When I did route redistribution between ISIS and OSPF, I found the
interface without "ip router isis" could not disperse to the ISIS domain on
the router performing route redistribution. How to solve this problem?
Config:
interface FastEthernet0/0
ip address 10.50.1.1 255.255.0.0
<-- without "ip router isis" -->
!
interface Serial0/0
encapsulation frame-relay
frame-relay lmi-type ansi
!
interface Serial0/0.1 point-to-point
ip address 10.15.1.2 255.255.0.0
ip router isis
frame-relay interface-dlci 501
<-- On the other side of frame relay router peer could not see the connected
route "10.50.0.0" ????-->
!
router ospf 10
redistribute isis metric 100 metric-type internal level-2
network 150.10.10.1 0.0.0.0 area 0
!
router isis
redistribute ospf 10 metric 10
net 00.0200.0000.0000.0500
!
regards,
Haohong Lin
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:53 GMT-3