From: Haohong Lin (hhlin@xxxxxxxxxx)
Date: Mon Apr 23 2001 - 20:15:14 GMT-3
I run OSPF on Fa0/0 and set the subnet to Area 0.
Regards,
Haohong Lin
-----Original Message-----
From: Vladimir Shchutski [mailto:vshchutski@yahoo.com]
Sent: 2001 04 24 2:10
To: Haohong Lin
Subject: Re: ISIS redistribution
Because you run neither OSPF nor ISIS on Fa0/0.
Regards,
Vladimir.
--- Haohong Lin <hhlin@szskzj.com> wrote:
> Hi,
>
> When I did route redistribution between ISIS
> and OSPF, I found the
> interface without "ip router isis" could not
> disperse to the ISIS domain on
> the router performing route redistribution. How to
> solve this problem?
>
> Config:
> interface FastEthernet0/0
> ip address 10.50.1.1 255.255.0.0
> <-- without "ip router isis" -->
> !
> interface Serial0/0
> encapsulation frame-relay
> frame-relay lmi-type ansi
> !
> interface Serial0/0.1 point-to-point
> ip address 10.15.1.2 255.255.0.0
> ip router isis
> frame-relay interface-dlci 501
> <-- On the other side of frame relay router peer
> could not see the connected
> route "10.50.0.0" ????-->
> !
> router ospf 10
> redistribute isis metric 100 metric-type internal
> level-2
> network 150.10.10.1 0.0.0.0 area 0
> !
> router isis
> redistribute ospf 10 metric 10
> net 00.0200.0000.0000.0500
> !
>
>
> regards,
>
> Haohong Lin
> **Please
> read:http://www.groupstudy.com/list/posting.html
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:54 GMT-3