From: Murphy, Brennan (Brennan_Murphy@xxxxxxx)
Date: Thu Apr 19 2001 - 21:13:08 GMT-3
As I recall the ccprep config did not work for me. I think you need
to make sure that each PVC has its own tunnel interface....
...sorry I don't have the configs with me as I am on travel.
-----Original Message-----
From: Ladipo Adefala [mailto:ladefala@hotmail.com]
Sent: Thursday, April 19, 2001 7:51 PM
To: lkouncar@UU.NET; carlphelan@hotmail.com; ccielab@groupstudy.com
Subject: RE: Frame Relay Switch with 2 Routers
I was able to get the appropriate command completion (v 12.07T), but it
looks like my end-to-end pvcs remain INACTIVE. A show frame route on both
routers acting as a frame switch shows that one-end of the PVCs are active
while the other end of the PVCs are INACTIVE.
I hope this isn't an issue with the code. Does anyone have any ideas?
Ladi
>From: "louie kouncar" <lkouncar@UU.NET>
>Reply-To: "louie kouncar" <lkouncar@UU.NET>
>To: "'Carl Phelan'" <carlphelan@hotmail.com>, <ccielab@groupstudy.com>
>Subject: RE: Frame Relay Switch with 2 Routers
>Date: Thu, 19 Apr 2001 19:41:26 -0400
>
>You can't use frame relay on a token ring or Ethernet.
>
>
>Louie J. Kouncar (CCIE)/Written
>TCO3 Senior Data Center Engineer
>UUNET
>W-703-343-6645
>C-703-304-2460
>
>
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>Carl Phelan
>Sent: Thursday, April 19, 2001 6:40 PM
>To: ccielab@groupstudy.com
>Subject: Frame Relay Switch with 2 Routers
>
>
>Hi,
>
>I am following the document from CCprep to create a frame relay switch from
>two 2501s. When I come to enter the following command:
>'frame-relay route 501 interface t0 105'
>in interface mode on Serial 1, the router reports an error in the command
>syntax with 't' or even the full word 'tunnel'. When I replace 't0' with a
>?
>the response is that it only expects the word 'serial'.
>I have tried IOS ver 11.1, 11.2 and 12.0 with the same problem on different
>routers - anybody have any ideas?
>
>Thanks.
>**Please read:http://www.groupstudy.com/list/posting.html
>**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:52 GMT-3