From: Sal Nathoo (snathoo2001@xxxxxxxxx)
Date: Tue Apr 17 2001 - 08:19:15 GMT-3
Hi,
I do not see the proper entries for ISDN setup.
Global config
isdn switch-type ???
Interface config
isdn spid1 ???????? ???????
isdn spid2 ???????? ???????
If you take the backup statement out. Can you check
the layer 1 & 2 settings for isdn. show isdn status??
Hope this helps.
Thanks,
Saleem
--- BIKEMAN <krode@bigpond.com> wrote:
> Hi all
>
> I am playing with backup interfaces and can't get it
> to work. Below is the
> configs, debugs and show that I have tried. What I
> don't understand is why the
> BRI goes to deactivated instead of active. Any ideas
> ?
>
> Config R3 :
>
> interface Serial1
> backup delay 3 3
> backup interface BRI0
> backup load 50 25
> ip address 10.0.3.2 255.255.255.0
> no ip directed-broadcast
> shutdown
> clockrate 250000
>
> interface BRI0
> ip address 10.0.2.2 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> dialer map ip 10.0.2.1 name R2 broadcast 95717183
> dialer-group 1
> isdn switch-type basic-net3
> isdn answer2 123
> ppp callback request
> ppp authentication chap
>
> When I do show backup with S1 active:
>
> R3#sh backup
> Primary Interface Secondary Interface Status
> ----------------- ------------------- ------
> Serial1 BRI0 normal
> operation
>
> Now I disable S1 and get the following from "debug
> backup" :
>
> R3(config)#int s1
> R3(config-if)#shut
> R3(config-if)#
> 01:14:24: BACKUP(Serial1): event = interface
> shutdown
> 01:14:24: BACKUP(Serial1): secondary interface
> (BRI0) moved to standby
> 01:14:24: BACKUP(Serial1): changed state to
> "disabled"
> 01:14:26: %LINK-5-CHANGED: Interface Serial1,
> changed state to
> administratively
> down
> 01:14:27: %LINEPROTO-5-UPDOWN: Line protocol on
> Interface Serial1, changed
> state
> to down
>
> and "show backup" :
>
> Primary Interface Secondary Interface Status
> ----------------- ------------------- ------
> Serial1 BRI0 disabled
>
>
> Thanks in advance
>
> Rudi
> **Please
> read:http://www.groupstudy.com/list/posting.html
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:47 GMT-3