From: Jaeheon Yoo (kghost@xxxxxxxxxxxx)
Date: Mon Apr 16 2001 - 21:18:28 GMT-3
Hi, Wang,
In the older IOS's(prior to 11.3), the command "ip ospf network
point-to-point" isn't available.
You can check this with Jeff Doyle's Routing TCP/IP, p.417
Regards,
Jaeheon
----- Original Message -----
From: "Wang, Roger" <Roger@inteqnet.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, April 17, 2001 8:37 AM
Subject: ip ospf network point-to-point command and loopback interface
>
> Hi, all,
>
> Just wanna make sure I'm not going insane, but in the older IOS's (11.2,
for
> example), the command "ip ospf network point-to-point" isn't available
(the
> router wouldn't take) under loopback interfaces, or is it just some step
> needed beforehand? For instance, "encap frame" is needed before a
> point-to-point or point-to-multipoint sub-interface can be specified.
>
> In the 12.0 IOS, it seems to work fine.
>
> Thanks for the info,
>
> Rog
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:47 GMT-3