RE: ip ospf network point-to-point command and loopback interface

From: Carlos Chorao (cchorao@xxxxxxxxxx)
Date: Mon Apr 16 2001 - 21:01:30 GMT-3

• Next message: simplimarvelous: "Re: multicast routing"
• Previous message: Rick Burts: "RE: External LSAs keeping ISDN line up!!!"
• Maybe in reply to: Wang, Roger: "ip ospf network point-to-point command and loopback interface"
• Next in thread: Jaeheon Yoo: "Re: ip ospf network point-to-point command and loopback interface"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi Rodger,

The "non-broadcast" and "point-to-multipoint" keywords added to IOS from
11.3(AA).

Carlos Chorao
CCNP,CCDP,MCSE,MCT
Auckland, New Zealand

-----Original Message-----
From: Wang, Roger [mailto:Roger@inteqnet.com]
Sent: Tuesday, April 17, 2001 11:37 AM
To: 'ccielab@groupstudy.com'
Subject: ip ospf network point-to-point command and loopback interface

Hi, all,

Just wanna make sure I'm not going insane, but in the older IOS's (11.2, for
example), the command "ip ospf network point-to-point" isn't available (the
router wouldn't take) under loopback interfaces, or is it just some step
needed beforehand? For instance, "encap frame" is needed before a
point-to-point or point-to-multipoint sub-interface can be specified.

In the 12.0 IOS, it seems to work fine.

Thanks for the info,

Rog
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html

• Next message: simplimarvelous: "Re: multicast routing"
• Previous message: Rick Burts: "RE: External LSAs keeping ISDN line up!!!"
• Maybe in reply to: Wang, Roger: "ip ospf network point-to-point command and loopback interface"
• Next in thread: Jaeheon Yoo: "Re: ip ospf network point-to-point command and loopback interface"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:47 GMT-3