From: Dan (dp595@xxxxxxxxxxxxx)
Date: Fri Apr 13 2001 - 12:54:44 GMT-3
I think you will still need to disable split-horizon on the "physical"
interface.
Dan Pontrelli
----- Original Message -----
From: "Haohong Lin" <hhlin@szskzj.com>
To: "Tarun Pahuja" <tpahuja@hotmail.com>
Cc: "CCIELab" <ccielab@groupstudy.com>
Sent: Thursday, April 12, 2001 11:25 PM
Subject: RE: split horizon
> Hi, Pahuja
>
> If you using point-to-point sub-interface and different subnets, it is
> unnecessay to disable eigrp split-horizon on hub router. But as with one
> common subnet, Disabling eigrp split-horizon is required. So, the spokes'
> routes can distribute each others.
>
> -----Original Message-----
> From: Tarun Pahuja [mailto:tpahuja@hotmail.com]
> Sent: 2001 04 13 3:50
> To: hhlin@szskzj.com
> Subject: split horizon
>
>
> hello friend,
> Just read your note on groupstudy. I am slightly confussed
> about eigrp split horizon. Do i need to diable it on the hum router for
the
> slokes to share information. that would only be possible if the hum router
> has not sun-interafaces. If the hun router has suninterfaces they you not
> bother about split horizon.
>
> am i right?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:45 GMT-3