From: Chia Kim Seng, Consultant, SCSNW-Sales (chiaks@xxxxxxxxxxxxxxxxxxxxxx)
Date: Tue Apr 10 2001 - 02:41:49 GMT-3
Just to clarify,
Isn't distribute-list got not effect on OSPF except when used on
redistribution?
Regards
Chia Kim Seng
SCS Networks Pte Ltd
7 Bedok South Road
Singapore 469272
Tel : 065-2403164
Fax: 065-2403110
-----Original Message-----
From: xander [mailto:xander@adt.ru]
Sent: Saturday, April 07, 2001 5:22 AM
To: Jerry Hutcheson
Cc: ccielab@groupstudy.com
Subject: Re: OSPF Distribute-list
Hello Jerry,
Please send complete topology and ospf config for your lab.
But I think guess without them.
It seems R1 is DR and R2 is BDR or OTHER ospf router.
So, LSA about your network(s) are collected by DR and then flooded to the
other routers. So, if you filter this particular network from DR, all
other routers in this network do not know about it(them) anyway.
The solution is to use distribute-list 1 out of S0 interface on DR router.
JH> I was under the impression that when doing a distribute list in on an
OSPF router with a deny access list that the router would remove the network
from its own route table but it would still be
JH> available on the downstream neighbors routing table.
JH> However when I did this it was removed from both IP routing tables. Does
anyone have any suggestions?
JH> R1
JH> Router ospf 100
JH> distribute-list 1 in s0/0
JH> access-list 1 deny 151.100.2.2 !!! route is coming from upstream of R1
and is going downstream to R2
JH> access-list 1 permit any
JH> R2
JH> !no access lists
JH> Route disappears from both routing tables.
JH> Jerry
-- WBW, xander mailto:xander@adt.ru CCNA, CCNP+VoiceAccess, CCIE very soon :-)...
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:43 GMT-3