From: Nodir Nazarov (nodir@xxxxxxxxxxxx)
Date: Sun Apr 08 2001 - 18:18:27 GMT-3
I am not sure if it's relevant or not. There is a known issue with
creating more than 1-2 tunnels sourcing physical interfaces with some
versions of 12.0 on low end routers. Try to source from loopback on your
hub router (if you are not doing it already).
Nodir
On Sun, 8 Apr 2001, fwells12 wrote:
> Hey folks,
> Firstly, I have done this will all physical interfaces with no problems. I
> don't know if I am just tired right now and cannot think straight, or whether
> there are genuine issues here. I am going to post this, get some sleep and
> then take a crack at it later. Maybe you guys have some thoughts...
>
> Got a frame cloud that has sub-interfaces on one router and physical
> interfaces on the spokes. I want to configure tunnels between the routers fo
r
> IPX connectivity. With tunnel interfaces you can only specify one
> destination, this means you need one tunnel per spoke. I tried creating two
> tunnels on the hub (one for each spoke) and I can only get one of them to wor
k
> at a time. I tried using both unique and identical network numbers on each
> tunnel, I also tried using different combinations of tunnel source and
> destinations. Still no joy.
>
> Anyone got any ideas and/or sample configs please?
>
> Cheers
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:42 GMT-3