From: vicarsb@xxxxxxxxxxxxxx
Date: Fri Apr 06 2001 - 20:48:54 GMT-3
Yes you can.
interface Port-channel1
ip address 10.x.x.x
!
interface FastEthernet1/0/0
no ip address
channel-group 1
!
interface FastEthernet1/1/0
no ip address
channel-group 1
!
Connect this to a port-channel on a switch
-----Original Message-----
From: Eric Vanuska (IT 456-2084) [mailto:"Eric Vanuska"@hal.hitachi.com]
Sent: Friday, April 06, 2001 4:24 PM
To: ccielab@groupstudy.com
Subject: Port Channel or other options
Hello all,
Sorry, this is a work related question, not immediately related
to my CCIE studies. :)
Is it possible to place multiple FastEthernet ports into a bundle,
something like Port-Channel or MPP. Port-Channel seems to
work in switches and MPP on WAN ports. Anyway to create
a big, fat trunk port using FastEthernets on a 4500 or 36xx
to a Cat 65xx?
Thanks, Eric V.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:42 GMT-3