From: xander (xander@xxxxxx)
Date: Fri Apr 06 2001 - 18:52:18 GMT-3
Hello Leah,
No you do not need it in case of simple p-2-p ATM connection
But you need to set up clock source INTERNAL.
Generally, ilmi and qsaal used with SVC and LANE.
In cciebootcamp lab 13 routers 14 and 14 are connected between each
other through LS1010 or through C5k with ATM. So ilmi and qsall needed
in this case.
LL> I do not have access to ATM on my home lab so I am just reading about it to
LL> learn. I am looking at Lab 13 from CCbootcamp and I have noticed that they
LL> are using qsaal for the point-to-point subinterface PVCs. I am also looking
LL> at the Doc CD and I notice that they only use qsaal for LANE and SVCs. Is i
t
LL> necessary to specify qsaal on a PVC?
LL> CCbootcamp:
LL> interface ATM0/0
LL> no ip address
LL> no ip directed-broadcast
LL> atm pvc 1 0 5 qsaal
LL> atm pvc 2 0 16 ilmi
LL> no atm ilmi-keepalive
LL> atm ilmi-pvc-discovery subinterface
LL> !
LL> interface ATM0/0.5 point-to-point
LL> ip address 172.16.2.1 255.255.255.0
LL> no ip directed-broadcast
LL> ip pim sparse-dense-mode
LL> Doc CD:
LL> interface atm 2/0
LL> pvc RouterA 0/16 ilmi
LL> exit
LL> atm ilmi-pvc-discovery subinterface
LL> exit
LL> !
LL> interface atm 2/0.1 multipoint
LL> ip address 172.21.51.5 255.255.255.0
LL> Leah Lynch
-- WBW, xander mailto:xander@adt.ru CCNA, CCNP+VoiceAccess, CCIE very soon :-)...
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:42 GMT-3